Do you possess room that may use a ceiling fan Installing a ceiling fan is as easy as switching your current light fixture. Most of the wiring you need is already there so the only thing is to change the current workbox with one that is developed for the weight of a ceiling fan. Hanging your brand new ceiling fan on an existing box that won't support the extra weight of the fan could lead to disaster. Before you start your project, go through the guidelines for the fan you have selected, and be sure that you have all of the essential tools.

If you plan to setup the fan on a cathedral type ceiling, you very well may need to get parts to extend the fan lower. Whenever you have every little thing all set, the very first thing you must do is make sure that the breaker is off so no power goes to the light fixture. After eliminating the current light fixture, check to see if the installed workbox can handle the weight of your ceiling fan. woodworking Generally they aren't made for a ceiling fan, so you will need to include further support. Adding support to the workbox is not that hard if you have admittance to the light fixture from the attic.

To help extra support, you nail a 2x4 within the ceiling rafters where it meets the top of the workbox. woodworking patterns Make sure the 2x4 is anchored in its place, and then bolt the box to the wood. If you complete it correctly, the fan should be well supported by the 2x4. If you dont have access to the attic, you will need to place a cross bracing in your ceiling. Performing this is much more of a challenge and may not be as safe as using a 2x4 but it is the best you can do if you dont have access to the attic.

After you have gathered the fan correctly, you are now ready to hang your fan. The task is to keep the fan while attaching the wiring. Relying on the fan, most come with a hanging frame, and others include a bracket with a J hook that lets you hold the motor housing woodworking plans. For most fans the wall switch will turn it on or off, while the chain will manage the speeds. If you also put in a light kit with the fan, the two can be controlled by a wall switch or chain.

Cabling the fan is as simple as connecting two black wires, two ground wires as well as white wires. Now all you need to do is accomplish assembling the fan according to the directions, by attaching the fan blades. When that is carried out, turn the breaker back on to see the results.